Ecu Flash Training Course Part 7: Closed & Open Loop Fuel Control
Evans Performance Academy Lifetime Membership
•
49m
Ecu Flash Training Course Part 7: Closed & Open Loop Fuel Control walks you through how the OEM Mitsubishi engineers designed the ECU to operate with both closed and open loop fuel calculations. We look at the STFT and LTFT fuel trim data to determine how the engine is running in closed loop control, as well as the thresholds to exceed to go into open loop conditions.
Up Next in Evans Performance Academy Lifetime Membership
-
Ecu Flash Training Course Part 8: MAF...
Ecu Flash Training Course Part 8: MAF Tuning & Datalogging goes through in extensive detail how to properly tune the fuel delivery on a MAF based Tehpra v7 rom. We look at what core tables to edit, what logging channels to select in Evo Scan, and creating custom math channels in Megalog Viewer s...
-
ECM Link Part 13: Boost Control Tuning
ECM Link Part 13 walks you through how to set-up, configure, and tune using boost control. We explore how to properly plumb the boost solenoid, open / closed loop control, and data log review to illustrate proper tuning techniques.
-
ECM Link Part 14: Dash & Misc Program...
ECM Link Part 14 walks you through setting up dash control to turn on the CEL light for knock, reprogramming the boost gauge for other purposes, and other miscellaneous settings in the ECM Link software.
7 Comments