HP Tuners Subaru Training Course Part 1: ECU Logic Operation walks you through the fundamentals of how the 32 bit Subaru ecu flow of programming logic works from the registration of airmass from the MAF sensor down to fuel, spark, torque, and boost calculations.

HP Tuners Subaru Training Course Part 2: VCM Suite Installation goes through the software install and shortcut creation to begin the training course.

HP Tuners Subaru Training Course Part 3: VCM Editor Overview walks you through the VCM editor software so you can get comfortable with accessing different aspects of the software.

HP Tuners Subaru Training Course Part 4: VCM Editor Read, Write, & Licensing walks you through the basics of getting started doing ECM reading, flashing (writing), and credit licensing with the HP Tuners MPVI 2 flash cable.

HP Tuners Subaru Training Course Part 5: VCM Scanner Overview walks you through the basics of using the VCM scanner and software features to begin the HPT Subaru training course.

HP Tuners Subaru Training Course Part 6: VCM Logging & Histogram Building breaks down how to data log using the VCM scanner software. In addition, we start to explore how to create a custom histogram and graphical plots to help analyze data more efficiently.

HP Tuners Subaru Training Course Part 7: VCM Scanner Wideband Integration walks you through how to integrate a wideband reading via MPVI2 pro link or RS232 / serial stream options.

HP Tuners Subaru Training Course Part 8: MAF vs Speed Density Tuning explores the differences in airmass registration between MAF and SD based tuning options within the Subaru 32 bit ecu.

HP Tuners Subaru Training Course Part 9: Injector Data Characterization takes an in-depth look at how the injector flow, latency, and short pulse-width data is used to convert a fuel mass requisition into an injector pulse-width. We also explore how to proper transfer injector data into the cali...

HP Tuners Subaru Training Course Part 10: Closed & Open Loop Operation breaks down how the closed and open loop fuel tuning strategy works in the 32 bit Subaru ecu.

HP Tuners Subaru Training Course Part 11: Lambda, AFR, & Stoichiometric walks you through the relationship between lambda and AFR readings and how it relates to the stoichiometric point of the fuel being tuned.

HP Tuners Subaru Training Course Part 12: MAF Closed Loop Fuel Tuning breaks down how to properly dial in the MAF airflow curve while tuning idle and cruise operating conditions.

HP Tuners Subaru Training Course Part 13: MAF Open Loop Fuel Tuning breaks down how to properly tune full throttle conditions while in MAF based air calculation mode within the Subaru 32 bit ecu. We explore using the VCM scanner to populate logged data and how to analyze the data to make proper ...

HP Tuners Subaru Training Course Part 14: Speed Density Closed-Loop Fuel Tuning breaks down how to properly dialed in the main VE airflow modeling table while in speed density operation. We learn how to log with the VCM scanner to populate custom histograms in order to calibrate the main VE tabl...

HP Tuners Subaru Training Course Part 15: Speed Density Open-Loop Fuel Tuning walks you through how to properly dial in the main VE airflow model table while in speed density mode. We learn how to use the VCM scanner in order to capture and analyze data to properly calibrate the main VE airflow ...

HP Tuners Subaru Training Course Part 16: MAF / Speed Density Blend Mode walks you through how to implement a dual airmass calculation mode within the HPT custom feature patch.

HP Tuners Subaru Training Course Part 17: Advanced VCM Scanner Math walks you through using custom math channels, histograms, and chart vs time within the VCM scanner.

HP Tuners Subaru Training Course Part 18: Cranking Fuel & Warm-Up walks you through normalizing the cranking fuel tables based on the fuel injector flow rate. We also look at the tables responsible for warm-up fuel enrichment.

HP Tuners Subaru Training Course Part 19: Idle Control Tuning walks you through how to program idle control within the Subaru 32 bit ecus. We also explore how to program idle control with large injectors and / or large camshafts.

HP Tuners Subaru Training Course Part 20: Accel & Decel Tuning breaks down how to renormalize accel and decel tables based on fuel injector flow rate size.

HP Tuners Subaru Training Course Part 21: Virtual Dyno explores using the virtual dyno software to generate horsepower / torque figures to help dial in boost control, AVCS, and spark timing during the calibration process.

HP Tuners Subaru Training Course Part 22: Spark Timing Basics breaks down how spark timing works within the Otto cycle and within the Subaru ecu programming.

HP Tuners Subaru Training Course Part 23: Spark Timing & Knock Control breaks down how the knock control works in conjunction with spark timing calculations within the Subaru 32 bit ecu.

HP Tuners Subaru Training Course Part 24: Spark Tuning Demo walks you through the spark tuning process from start to finish on a Subaru STI using a chassis dyno.

HP Tuners Subaru Training Course Part 25: Boost Control Basics breaks down the relationship between a turbocharger, wastegate, and boost control solenoid on a turbocharged engine.

HP Tuners Subaru Training Course Part 26: Subaru Boost Control Logic walks you through how the boost control programming works within the Subaru 32 bit ecu.

HP Tuners Subaru Training Course Part 27: Boost Control Tuning Demo walks you through the boost control tuning procedure with a Subaru STI on the chassis dyno from start to finish.

HP Tuners Subaru Training Course Part 28: Breakpoint Rescaling walks you through how to properly perform breakpoint rescaling to calculate fuel, spark, and variable cam control at higher power levels.

HP Tuners Subaru Training Course Part 29: AVCS Tuning walks you through how the variable cam control (AVCS) works on a Subaru engine. We explore how to properly tune the AVCS on a Subaru STI application while on the chassis dyno.

HP Tuners Subaru Training Course Part 30: Torque Table Tuning walks you through how to calibrate the torque tables to influence the DBW throttle response.

HP Tuners Subaru Training Course Part 31: Flex Fuel Tuning breaks down how to properly calibrate the flex fuel tuning feature within the HPT custom feature set.

HP Tuners Subaru Training Course Part 32: Miscellaneous Programming walks you through how to use the launch control, full throttle shift, and DTC programming with Subaru applications.

HP Tuners Subaru Live Training Part 1: Base Map Creation walks you through creating a base map for a bolt-on Subaru STI to begin the live training process.

HP Tuners Subaru Live Training Part 2: MAF Based Tuning walks you through the MAF calibration process on a bolt-on Subaru STI. We learn how to confirm the measured airmass is calibrated correctly against the horsepower the engine producing.

HP Tuners Subaru Live Training Part 3: Speed Density Based Tuning walks you through the calibration process to properly dial in the main VE table within the speed density operation. We learn how to verify the estimated airmass coming from the VE is properly programmed against the horsepower leve...

HP Tuners Subaru Live Training Part 4: AVCS, Spark, and Boost Tuning walks you through the final calibration details in order to properly dial in the tuning process on a Subaru STI including variable cam tuning, spark tuning / knock control, and boost control.

HP Tuners Subaru Training Course Part 33: Basemap Creation walks you through how to create a base file to start your tuning process. We walk through all aspects of base file creation from MAF scaling to boost control.

HP Tuners Subaru Training Course Part 34: Template Applicator walks you through how to utilize the template applicator VCM Editor feature to generate quick basemaps to get started tuning your Subaru.

HP Tuners Subaru Training Course Part 35: High Power Basemap Creation walks you through how to create a base file for higher power levels using the template applicator feature.