HP Tuners Ford Gen 2 Coyote Training Part 1: VCM Software Install walks you through downloading and installing the VCM software suite onto your laptop to begin the training course.

HP Tuners Ford Gen 2 Coyote Training Part 2: VCM Editor Overview walks you through the VCM Editor software to learn the basics before moving into future training modules.

HP Tuners Ford Gen 2 Coyote Training Part 3: VCM Scanner Overview walks you through the basics of the VCM Scanner software to begin the training course.

HP Tuners Ford Gen 2 Coyote Training Part 4: Histograms, Math Channels, & Filters walks you through some more advanced functionality of the VCM Scanner software.

HP Tuners Ford Gen 2 Coyote Training Part 5: VCM Editor Read, Write, & License shows you how to do a read, flash, and license process on a calibration file to begin tuning with HP Tuners.

HP Tuners Ford Gen 2 Coyote Training Part 6: Repository & Comparison Feature walks you through how to use the repository and comparison feature found within the VCM Editor software.

HP Tuners Ford Gen 2 Coyote Training Part 7: Template Applicator walks you through to how use the rapid base map generator feature found within the VCM Editor software.

HP Tuners Ford Gen 2 Coyote Training Part 8: PCM Logic Operation breaks down how the Ford ECM logic is programmed from fuel / airflow model to the torque modeling.

HP Tuners Ford Gen 2 Coyote Training Part 9: Source Codes walks you through the various source codes available to help understand where the Ford ECM is sourcing its fuel, spark, torque, and other commands from while operating the engine.

HP Tuners Ford Gen 2 Coyote Training Part 10: Injector Characterization Data walks you through how the low/high slope, offset, and breakpoint multipliers work within the injector data programming.

HP Tuners Ford Gen 2 Coyote Training Part 11: Return Fuel System Programming breaks down the needed changes to the calibration file for a return style fuel system.

HP Tuners Ford Gen 2 Coyote Training Part 12: Throttle Body Data Programming walks you through updating the throttle body model within the Ford ECMs to account for a larger than stock throttle size.

HP Tuners Ford Gen 2 Coyote Training Part 13: Lambda, AFR, & Stoich breaks down understanding the differences in fuel terminologies and how they fit into the air / fuel model.

HP Tuners Ford Gen 2 Coyote Training Part 14: Closed-Loop Fuel Control walks you through how the STFT and LTFT function to achieve a desired target lambda.

HP Tuners Ford Gen 2 Coyote Training Part 15: Raising Limits Before Calibrating walks you through the general updates and changes needed to be made before starting to tune.

HP Tuners Ford Gen 2 Coyote Training Part 16: O2 Transport Delay Tuning walks you through dialing in the o2 transport delay to achieve proper response times from the oxygen sensor feedback into the closed-loop correction.

HP Tuners Ford Gen 2 Coyote Training Part 17: MAF Tuning Basics breaks down working with a MAF sensor within the Ford ECM programming.

HP Tuners Ford Gen 2 Coyote Training Part 18: MAF Calibration Demo walks you through how to dial in the MAF table based on logged data from the VCM Scanner.

HP Tuners Ford Gen 2 Coyote Training Part 19: Bad MAF / Injector Data walks you through how to determine if you have bad injector data or incorrectly calibrated MAF curve.

HP Tuners Ford Gen 2 Coyote Training Part 20: Injector Low/High Slope Tuning walks you through how to dial in the low/high slope data to correct bad injector data.

HP Tuners Ford Gen 2 Coyote Training Part 21: VCT Basics breaks down the basics of the variable cam control within the Ford ECM programming.

HP Tuners Ford Gen 2 Coyote Training Part 22: VCT Distance, Array, Snap to Line walks you through an advanced look at the VCT scheduling in order to move into future training modules with VCT programming.

HP Tuners Ford Gen 2 Coyote Training Part 23: CMV Deletes / Custom VCT Scheduling walks you through how to prepare VCT programming based on deleting the CMV.

HP Tuners Ford Gen 2 Coyote Training Part 24: Locked Mapped Points / CMV walks you through how to lock both mapped points and charge motion valves to dial in speed density, torque tables, and spark timing properly.

HP Tuners Ford Gen 2 Coyote Training Part 25: VCT Optimum Power Scheduling walks you through dialing in the VCT OP for maximum torque / power.

HP Tuners Ford Gen 2 Coyote Training Part 26: Speed Density Tuning (Mustang) breaks down how to properly calibrate the speed density tables within a Mustang application.

HP Tuners Ford Gen 2 Coyote Training Part 27: Speed Density Tuning (F150) breaks down how to properly calibrate the speed density tables associated with the VCT scheduling mapped points.

HP Tuners Ford Gen 2 Coyote Training Part 28: Torque Control Basics walks you through how the torque based control system works on a Gen 2 coyote PCM.

HP Tuners Ford Gen 2 Coyote Training Part 29: Torque Model Tuning walks you through a demonstration on how to resolve IPC wheel torque errors and calibrate the torque based control to the mods done to your vehicle.

HP Tuners Ford Gen 2 Coyote Training Part 30: DBW Response Tuning walks you through how to achieve a more linear pedal / plate relationship in the DBW control.

HP Tuners Ford Gen 2 Coyote Training Part 31: Transient Fuel Tuning walks you through how to dial in transient fuel tuning looking at logged data.

HP Tuners Ford Gen 2 Coyote Training Part 32: Idle Control Tuning walks you through how the torque based idle control functions and how to achieve the desired idle characteristics.

HP Tuners Ford Gen 2 Coyote Training Part 33: Cranking Fuel / Warm-Up breaks down how the cranking fuel and warm-up enrichment is programmed.

HP Tuners Ford Gen 2 Coyote Training Part 34: Spark Timing Basics breaks down how spark timing works within the combustion cycle. We cover the relevance of spark timing to cylinder pressure and how/why we are optimizing it.

HP Tuners Ford Gen 2 Coyote Training Part 35: Spark Timing Overview takes a look at how the spark timing tables and knock control work in conjunction to deliver proper spark to the engine.

HP Tuners Ford Gen 2 Coyote Training Part 36: Spark Tuning Demo gives you a step by step tuning demonstration with an s550 mustang on our chassis dyno showing the spark tuning process.

HP Tuners Ford Gen 2 Coyote Training Part 37: Diagnostic / Misc Programming walks you through several different topics within the Ford ECM tuning that don't fit into other training tutorials.

HP Tuners Ford Gen 2 Coyote Training Part 38: Ghost Cam / Burble Tuning walks you through how to dial in a ghost cam / lumpy idle and deceleration pops/bangs on a gen 2 coyote engine.

HP Tuners Ford Gen 2 Coyote Training Part 39: Flex Fuel Tuning breaks down how to properly tune petrol and ethanol fuel blends within the Ford ECM. We explore how to properly tune the fuel / spark regardless of the ethanol content within the fuel system.

HP Tuners Ford Gen 2 Coyote Training Part 40: Breakpoint Rescaling walks you through how to rescale various tables for higher load / rpm / torque conditions.

HP Tuners Ford Gen 2 Coyote Training Part 41: NA Basemap Creation walks you through how to create a basemap for a bolt-on NA Gen 2 Coyote engine to start off the calibration process.

HP Tuners Ford Gen 2 Coyote Training Part 42: FI Basemap Creation walks you through using the template applicator to create a starting calibration to begin the tuning process for a forced induction coyote engine.

HP Tuners Ford Gen 2 Coyote Training Part 43: 6R80 Transmission Basics walks you through how the transmission functions internally and general settings within the TCM programming.

HP Tuners Ford Gen 2 Coyote Training Part 44: 6R80 Shift Scheduling walks you through how to dial in shift points for part throttle and full throttle operation. We utilize a chassis dyno to illustrate dialing in the WOT shift points.

HP Tuners Ford Gen 2 Coyote Training Part 45: 6R80 Shift Pressure / Speed breaks down how to achieve faster and firmer shifts at WOT conditions using the 6R80 TCM programming.