Introduction to AEM Infinity training course.

AEM Infinity training course part 1 walks you through downloading and installing the software onto your laptop, as well as downloading the firmware file specific for your Infinity.

AEM Infinity training course part 2 walks you through installing the firmware image onto the Infinity, as well as working with the session ID's to begin the tuning process.

AEM Infinity training course part 3 walks you through basic software navigation to get comfortable with the layout of the Infinity Tuner software.

AEM Infinity training course part 4 walks you through both laptop & on-board data logging using the AEM Infinity Tuner software. We also take an in-depth look at how to format a new USB storage drive using the on-board logging feature.

AEM Infinity training course part 5 walks you through editing existing layout/templates for tuning, creating a new page within the layout, and creating a fresh layout.

AEM Infinity training course part 6 walks you through setting up our basic configuration and sensor data. This includes things such as injector information, basic sensors, engine details and other pertinent information that we need to establish before tuning begins.

AEM Infinity training course part 7 walks you through setting up additional inputs to the Infinity such as additional pressure & temp sensors, switches, speed sensors and more.

AEM Infinity training course part 8 walks you through configuring outputs to control items such as fuel pump, radiator fan, a/c clutch, VTEC & tachometer.

AEM Infinity training course part 9 walks you through how the Infinity system works with injector characterization data differently for a return and return-less fuel system. As an added bonus we take a look at adding a fuel pressure sensor to our fuel system, and wiring the sensor into the Infin...

AEM Infinity training course part 10 walks you through the cranking fuel trim tables found within the AEM Infinity Tuner software and how to properly tune them.

AEM Infinity training course part 11 walks you through the post-start and warm-up enrichment tables found within the AEM Infinity Tuner software and how to properly tune them.

AEM Infinity training course part 12 walks you through how to set-up and work with the idle control programming found in the AEM Infinity software.

AEM Infinity training course part 13 walks you through working with our main VE fuel table, closed loop fuel tuning techniques, wiring in an external wideband controller for closed loop control, and utilizing the fuel trim modifier tables.

AEM Infinity training course part 14 walks you through working with our main ignition timing table and spark modifier tables.

AEM Infinity training course part 15 walks you through the acceleration enrichment and deceleration fuel cut found in the Infinity Tuner software.

AEM Infinity training course part 16 walks you through working with the protection fail-safe features found in the Infinity software using our engine simulator to see cause/effect during the programming of the tables.

AEM Infinity training course part 17 walks you through setting up and tuning with the flex fuel feature in Infinity Tuner software.

AEM Infinity training course part 18 walks you through setting up and configuring the boost control feature found in Infinity Tuner software. We also take a look at closed loop PID control and how to successfully implement it during tuning.

AEM Infinity training course part 19 walks you through setting up and configuring traction control. Using our engine simulator we take a very detailed look at how to do a rolling wheel speed calibration, and how the traction control system works based on the many tables that need to be properly...

AEM Infinity training course part 20 walks you through setting up and configuring the main rev limiter, 2 step rev limiter and 3 step rev limiters.

AEM Infinity training course part 21 walks you through setting up and configuring the launch anti-lag and rolling anti-lag features.

AEM Infinity training course part 22 walks you through setting up and configuring the staged fuel injection feature in the AEM Infinity Tuner software.

AEM Infinity training course part 23 walks you through setting up and configuring per cylinder knock control in the AEM Infinity Tuner software.

AEM Infinity training course part 24 walks you through setting up and configuring the nitrous control feature found in the AEM Infinity Tuner software.

AEM Infinity training course part 25 walks you through setting up and configuring both intake and exhaust variable cam control in the AEM Infinity Tuner software.

AEM Infinity training course part 26 walks you through using the diagnostics functions of the AEM Infinity Tuner software to help troubleshoot no start, misfiring and cam/crank sensor issues.

AEM Infinity training course part 27 walks you through how to calculate gear position for any gear ratio based tables.

AEM Infinity training course part 28 walks you through to set-up the shift cut feature using a clutch switch, clutch pressure sensor or strain gage.

AEM Infinity training course part 29 walks you through using the secondary volumetric efficiency table for characterizing the high cam operation in VTEC. We also take a look at other usages for the secondary VE table.

AEM Infinity training course part 30 walks you through using the on-board datalogging feature. The logger allows 100 channels to be captured, and we explore populating the data list with relevant channels to take advantage of this awesome feature.

AEM Infinity training course part 31 walks you through downloading, installing and configuring AEM Data software to review the on-board datalog files.

AEM Infinity training course part 32 walks you through reviewing an on-board datalog in the AEM Data software, as well as learning how to utilize the software features such as math channels and overlays.

AEM Infinity training course part 34 walks you through using the diagnostic firmware to test injector, coil and low side outputs.

AEM Infinity training course part 33 walks you through how to read a datalog from a high hp FWD drag vehicle using the 3-Step, Traction Control & Closed Loop Boost Control features.

Follow along as lead instructor, Jeff Evans, walks you through how to utilize the Virtual Dyno software to produce horsepower and torque readings based data log files using AEM Infinity. We explore the process of how to properly export data from AEM Data log software to view within the Virtual D...

AEM Infinity training course part 36 walks you through utilizing the multi-tune feature within the AEM Infinity Tuner software. We look at utilizing either a basic on/off switch or trim pot to allow the map switching to occur on the fly.

AEM Infinity training course part 37 walks you through how to set-up custom outputs within the AEM Infinity Tuner software. We explore setting up more commonly used custom outputs such as secondary fuel pump control or secondary boost control solenoids.

AEM Infinity training course part 38 walks you through how to use a simple hack to open up onboard data log files (.itlog) within the AEM Infinity Tuner software for editing purposes.

AEM Infinity Part 39: Megalog Viewer HD Software shows you an alternate way to process data logs in a 3rd party data logging software. We specifically take a look at using the Histogram overlay feature to more efficiently tune the main VE table.