HP Tuners GM Gen III Part 6: Injector Characterization Data
HP Tuners GM Gen III Training Course
•
23m
HP Tuners GM Gen III part 6 takes a look at the first step in our tuning process; programming the fuel injector characterization data. While very simple, its vital to enter the correct data into our calibration file so at the most basic level the GM ecu can turn its calculated fuel mass into the correct injector pulse-width to achieve a desired AFR.
Up Next in HP Tuners GM Gen III Training Course
-
HP Tuners GM Gen III Part 7: MAF Cali...
HP Tuners GM Gen III part 7 takes a look at how we can utilize the short + long term fuel trim data in a custom graph template in the VCM scanner software to recalibrate our MAF curve.
-
HP Tuners GM Gen III Part 8: VE Calib...
HP Tuners GM Gen III part 8 takes a look at converting our calibration file to run in speed density mode (VE based). We also take a look at how we can utilize the short + long term fuel trim data in a custom graph template in the VCM scanner software to recalibrate our VE table.
-
HP Tuners GM Gen III Part 9: Power En...
HP Tuners Part 9 takes a look at how to set up the power enrich setting so we can redefine a desired air/fuel under WOT conditions.
44 Comments