Link G5 Training Course Part 48: Mixture Map Fuel Tuning we explore how to utilize the mixture map to dial in the main fuel table using the PCLink software.

Link G5 Training Course Part 49: Quick Tune Fuel Tuning walks you through how to utilize the quick tune feature in order to rapidly tune the main fuel table in the PCLink software.

Link G5 Training Course Part 50: Cranking, Post-Start, & Warm-Up Fuel breaks down how to get your engine fired up and running utilizing the cranking and modifier fuel tables in the PCLink software.

Link G5 Training Course Part 51: Fuel Charge Cooling Coefficient walks you through how to dial in the coefficient to account for the cooling effect the fuel you are using has on the airflow model.

Link G5 Training Course Part 52: Charge Temp Approximation Table walks you through setting up the charge temp approximation table to obtain an accurate charge temperature value used in the airflow model.

Link G5 Training Course Part 53: IAT Fuel Compensation Table walks you through how the IAT fuel compensation table works and when we need to integrate it during the calibration process.

Link G5 Training Course Part 54: Fuel Injection Timing (Port Injection) walks you through how the fuel injection timing works in a port injection engine. We specifically take a look at the end of injection orientation of the injection timing and how to optimize things based around camshaft valve...

Link G5 Training Course Part 55: Acceleration Enrichment walks you through the transient fuel programming found within the PCLink software.

Link G5 Training Course Part 56: Overrun Fuel Cut Off walks you through how the fuel cut off functions in lift throttle / over run conditions.

Link G5 Training Course Part 57: Fuel Tuning Demo walks you through a real world demonstration of using the various fuel tuning techniques learned in the training course.

Link G5 Training Course Part 58: Spark Timing Basics walks you through the basic concept behind what spark timing represents in EFI tuning.

Link G5 Training Course Part 59: Spark Timing Table Set-Up walks you through configuring a spark timing table for a naturally aspirated or forced induction engine as a safe starting point for calibrating.

Link G5 Training Course Part 60: Spark Timing Modifier Tables walks you through the various spark timing modifier tables to account for variations in inlet air temp, coolant temp, as well as user defined conditions.

Link G5 Training Course Part 61: Individual Cylinder Trims walks you through how to implement and calibrate with the individual cylinder trim tables in the PCLink software.

Link G5 Training Course Part 62: Classic Knock Control Set-up & Overview walks you through how to implement the classic style knock control within the PCLink software.

Link G5 Training Course Part 63: Spark Tuning + Classic Knock Mode walks you through a real world demonstration of calibrating spark timing at full throttle using the traditional knock mode on a Mainline chassis dyno.

Link G5 Training Course Part 64: Normalized Knock Control walks you through the basics of programming the normalized knock control strategy within the PCLink software.

Link G5 Training Course Part 65: Normalized Knock + Spark Tuning Demo walks you through a real world demonstration calibrating the normalized knock control while tuning spark timing using a Mainline chassis dyno.

Link G5 Training Course Part 66: 4-D / 5-D Tables walks you through how and when you want to work with the 4-D / 5-D compensation tables in the PCLink software programming.

Link G5 Training Course Part 67: Idle Control Basics walks you through conceptually what is going on during the idle control process whether you are tuning with an idle control motor, drive-by-wire, or mechanical based idle.

Link G5 Training Course Part 68: Mechanical Idle Control walks you through how to dial in idle without an idle control motor using throttle blade airflow and spark timing feedback.

Link G5 Training Course Part 69: PWM IACV Idle Control walks you through how the idle control routine works based around an PWM based idle control motor.

Link G5 Training Course Part 70: Stepper Idle Control walks you through the idle control routine based around a stepper idle control motor commonly found on Mitsubishi, Toyota, and early GM engines.

Link G5 Training Course Part 71: Limiters how to properly program limiter strategies over rev protection in the PCLink software.