Link G4x Training Course

Link G4x Training Course

Link G4x training course starts with the basics of downloading and installing the PCLink software. Basic functions such as fuel, ignition and idle programming are covered as well as more advanced features such as anti-lag, rev limiters, traction control, closed loop PID control and much more. Each new tuning feature covered in the training series gets a new page layout created within the PCLink software with a logging template so you can make the most of your tuning using Link!

Link G4x Training Course
  • G4x Course Packet (click to download)

    5.75 MB

    G4x Course Packet that includes ecu & logging layouts as well Excel spreadsheet calculators.

  • Link G4x Training Course: Introduction

    Link G4x Training Course: Introduction

  • Link G4x Training Part 1: PCLink Software Download & Install

    Link G4x Training Part 1: PCLink Software Download & Install walks you through the download and installation of the PC Link software onto your laptop. We also do a brief software overview to begin the training course.

  • Link G4x Training Part 2: Creating Page Layouts

    Link G4x Training Part 2: Creating Page Layouts walks you through how to create, edit, and save page layouts within the PCLink software. We also take a look at the custom provided master page layout we will be using throughout the training course.

  • Link G4x Training Part 3: Working With Calibration Files

    Link G4x Training Part 3: Working With Calibration Files walks you through how to properly save, edit, and upload calibration files to your Link G4x system.

  • Link G4x Training Part 4: Firmware Updating

    Link G4x Training Part 4: Firmware Updating walks you through the firmware updating process on your Link G4x standalone. We also explore other miscellaneous features and functions with the PCLink software.

  • Link G4x Training Part 5: Datalogging

    Link G4x Training Part 5: Datalogging walks you through how to work with the datalogging functionality within the PCLink software. We explore both the laptop and on-board logging features so you can properly capture datalogs.

  • Link G4x Training Part 6: Basic Inputs & Configuration

    Link G4x Training Part 6: Basic Inputs & Configuration shows you how to properly calibrate and check the basic inputs such as MAP, ECT, IAT, and TPS sensors within the PCLink software.

  • Link G4x Training Part 7: Advanced Analog Inputs

    Link G4x Training Part 7: Advanced Analog Inputs walks you through how to set-up various advanced inputs such as oil / fuel pressure, oil temperature, rotary trim pot switches, and more within the PCLink software.

  • Link G4x Training Part 8: Programming Digital Inputs

    Link G4x Training Part 8: Programming Digital Inputs walks you through how to properly program, test, and calibrate switched digital inputs and speed sensors.

  • Link G4x Training Part 9: Output Programing

    Link G4x Training Part 9: Output Programing walks you through how to program various outputs such as radiator fans, fuel pumps, VTEC, and more using the PCLink software.

  • Link G4x Training Part 10A: Ignition Set-Up & Coil Dwell

    Link G4x Training Part 10A: Ignition Set-Up & Coil Dwell walks you through configuring the ignition system details in order to allow a Link G4x system to properly deliver spark to the engine. In addition we also learn how to program the coil dwell table for a variety of popular coils.

  • Link G4x Training Part 10B: Cam/Crank Set-Up

    Link G4x Training Part 10B: Cam/Crank Set-Up takes an in-depth look at how to properly configure cam/crank trigger within the PCLink software. We explore the differences between hall effect and VR/reluctor style sensor, signal types, and learn how to uses the built-in trigger scope to measure si...

  • Link G4x Training Part 11: Fuel Injector Characterization

    Link G4x Training Part 11: Fuel Injector Characterization walks you through the different types of fuel injectors, fuel injectors drivers, and programming the fuel injector characterization data to ensure proper fuel delivery.

  • Link G4x Training Part 12: Fuel Injection Modes

    Link G4x Training Part 12: Fuel Injection Modes walks you through the various types of fuel injection strategies available within the PCLink software. From basic throttle body injection to staged sequential injection we review everything you'll need to know!

  • Link G4x Training Part 13: Traditional Fuel Mode

    Link G4x Training Part 13: Traditional Fuel Mode walks you through how to calibrate the main fuel table in the traditional fuel mode. We explore all the details you'll need to know in order to make proper adjustments within traditional mode.

  • Link G4x Training Part 14: Modeled Mode

    Link G4x Training Part 14: Modeled Mode walks you through tuning in the modeled/VE fuel strategy. We break down all of the key variables that affect the fuel calibration process so you can properly dialed in your fuel table.

  • Link G4x Training Part 15: Main Fuel Table

    Link G4x Training Part 15: Main Fuel Table walks you through how to calibrate the main fuel table. We explore editing techniques, break point rescaling, and general workflow to tuning.

  • Link G4x Training Part 16: Fuel Trims

    Link G4x Training Part 16: Fuel Trims walks you through how the IAT (intake air temperature) and ECT (engine coolant temperature) fuel compensation tables work in both the traditional and modeled fuel modes.

  • Link G4x Training Part 17: Cranking & Post-Start Fuel

    Link G4x Training Part 17: Cranking & Post-Start Fuel walks you through properly calibrating the pre-prime, cranking, and post-start fuel to allow an engine to fire up and run properly.

  • Link G4x Training Part 18: Closed Loop Lambda

    Link G4x Training Part 18: Closed Loop Lambda takes a look at how the closed loop fuel correction works. We explore utilizing both a narrowband and wideband sensor in the closed loop fuel correction as well as single and dual bank control.

  • Link G4x Training Part 19: Mixture Map

    Link G4x Training Part 19: Mixture Map takes an in-depth look at utilizing logged data with the mixture map to calibrate the main fuel table.

  • Link G4x Training Part 20: Quick Tune

    Link G4x Training Part 20: Quick Tune walks you through using the quick tune feature to dial in the main fuel table very efficiently.

  • Link G4x Training Part 21: Fuel Injection Timing

    Link G4x Training Part 21: Fuel Injection Timing walks you through how to properly calibrate fuel injection timing in sequential and semi-sequential modes. We learn proper editing techniques to populate the injection timing table and integrating an Excel based injection timing calculator.