HP Tuners Ford Gen 3 Coyote Training Course Part 47: DBW Response Tuning walks you through dialing in the pedal / plate relationship within the DBW operation.

HP Tuners Ford Gen 3 Coyote Training Course Part 48: Throttle Body Model walks you through understanding the throttle body model within the Gen 3 ECM logic.

HP Tuners Ford Gen 3 Coyote Training Course Part 49: Throttle Body Model Tuning walks you through how to dial in the TB model tables if you have unknown throttle body without data.

HP Tuners Ford Gen 3 Coyote Training Course Part 50: Idle Control Basics walks you through how the idle control system works within a Gen 3 ECM.

HP Tuners Ford Gen 3 Coyote Training Course Part 51: Idle Control Targets walks you through how to dial in the idle target for the idle control system on a Gen 3 ECM

HP Tuners Ford Gen 3 Coyote Training Course Part 52: Idle Tuning - Closed Loop walks you through how the closed loop based system works and how to dial in the feed forward table.

HP Tuners Ford Gen 3 Coyote Training Course Part 53: Idle - Torque Tuning walks you through understanding how the torque based idle control works and what to adjust to get the desired results at idle.

HP Tuners Ford Gen 3 Coyote Training Course Part 54: SAI Torque Reduction walks you through understanding the torque ratio based control system in the Gen 3 ECM logic.

HP Tuners Ford Gen 3 Coyote Training Course Part 55: Spark Timing Basics walks you through understanding the fundamentals behind spark timing with in a internal combustion engine.

HP Tuners Ford Gen 3 Coyote Training Course Part 56: Spark Timing Overview walks you through how the spark timing logic works within a Gen 3 ECM.

HP Tuners Ford Gen 3 Coyote Training Course Part 57: Knock Control Overview walks you through how the knock control spark feedback based system works within the Gen 3 ECM.

HP Tuners Ford Gen 3 Coyote Training Course Part 58: Cruise Spark Tuning walks you through how to dial in cruise spark timing if running a custom VCT schedule or extensive modifications have been done.

HP Tuners Ford Gen 3 Coyote Training Course Part 59: WOT Spark Tuning walks you through how to dial in the WOT spark timing on a Gen 3 engine. We use our Mainline hub dyno to illustrate the spark changes to power / torque output.

HP Tuners Ford Gen 3 Coyote Training Course Part 60: Cranking & Warm-Up Fueling walks you through understanding how the fueling is called out for crank to fire and warm-up in the Gen 3 logic.

HP Tuners Ford Gen 3 Coyote Training Course Part 61: COT Protection walks you through understanding how the COT protection works and what to do for calibrating the system with high flow cats.

HP Tuners Ford Gen 3 Coyote Training Course Part 62: Cat Deletes walks you through what needs to be programmed in order to account for cat deletes on a race vehicle application.

HP Tuners Ford Gen 3 Coyote Training Course Part 63: Rev Limiter Programming walks you through how to change the rev limiter on manual and auto based Gen 3 ECMs.

HP Tuners Ford Gen 3 Coyote Training Course Part 64: Tire, Gear, Speed Limiter walks you through how to recalibrate the ECM for tire/wheel/gearing changes as well as updating speed limiter settings.

HP Tuners Ford Gen 3 Coyote Training Course Part 65: Engine Diagnostics walks you through changing the engine diagnostics settings as well as dialing in the P0068 table for fail safe protection.

HP Tuners Ford Gen 3 Coyote Training Course Part 66: Alternator Programming walks you through how to ramp up battery voltage under higher loads to get more performance from the fuel pump and coil pack / spark energy.

HP Tuners Ford Gen 3 Coyote Training Course Part 67: Active Valve Programming walks you through how the active exhaust valve programming works and what to change to get different operation from the exhaust valves.

HP Tuners Ford Gen 3 Coyote Training Course Part 68: Burble Tuning walks you through how to set-up burble / "pops and bangs" in the Gen 3 programming.

HP Tuners Ford Gen 3 Coyote Training Course Part 69: Flex Fuel Logic & Set-Up walks you through understanding how the flex fuel compensation works within the Ford logic so you can run any blend of petrol / ethanol fuel.

HP Tuners Ford Gen 3 Coyote Training Course Part 71: NA Basemap - Basic Bolt-Ons walks you through how to create a basemap for a Gen 3 with normal bolt-on mods like intake, long tube headers, high flow cats, and cat back exhaust.