Fuel Tech Part 4: Basemap creation
Fuel Tech Training Course • 33m
Follow along as lead instructor, Jeff Evans, walks you through how to create a basemap within the FT manager software to begin tuning. We take a further look at changing parameters beyond the base map wizard to ensure you can get your engine fired up and running properly.
Up Next in Fuel Tech Training Course
-
Fuel Tech Part 5: Configuring Inputs
Follow along as lead instructor, Jeff Evans, walks you through how to properly set-up and configure various common inputs to your Fuel Tech controller. We cover inputs such as MAP, TPS, Oil Pressure/Fuel Pressure, Wheel Speeds, and more.
-
Fuel Tech Part 6: Configuring Outputs
Follow along as lead instructor, Jeff Evans, walks you through how to properly set-up and configure outputs within the FT Manager software. We explore common outputs such as radiator fan, fuel pump, VTEC, boost solenoid, and many more.
-
Fuel Tech Part 7: Main Fuel Table & F...
Follow along as lead instructor, Jeff Evans, walks you through all the details you need to know on tuning the main fuel table. We also explore how to properly set-up the fuel injector data within the calibration file with proper injector data.
19 Comments