Emtron Training Course Part 48: Alpha-N Tuning walks you through how to work within Alpha-N programming in the speed density airflow model. We explore both naturally aspirated and forced induction with Alpha-N tuning.

Emtron Training Course Part 49: VTEC Tuning walks you through how to program the cam switching feature within the EMtron ecu. We explore how to integrate dual VE and spark tables to properly characterize Honda VTEC engines for both low and high cam operation.

Emtron Training Course Part 50: Staged Fuel Injection walks you through how to control dual sets of fuel injectors. We explore how to properly program the secondary injectors to turn on or off at the proper time during the engine operation.

Emtron Training Course Part 51: Over Run Fuel Cut Off walks you through how to program the ORFCO within the Emtron software. We learn how the OFRCO can be used to improve drivability when on/off throttle as well as improve fuel economy.

Emtron Training Course Part 52: Timers takes a look at how to integrate virtual timers within the calibration strategy. We explore the various timer options and how/when to use them.

Emtron Training Course Part 53: Cal Slot Control walks you through implementing the cal slot control option within the Emtron ecu. We explore several different examples of how and when to implement the cal slot control feature.

Emtron Training Course Part 54: Basic Water/Meth Injection walks you through how to proper integrate the Emtron with a water/meth kit like AEM or Aquamist. We learn how to configure fail-safe protection into the tuning strategy to protect the engine in the event the water/meth stops spraying.

Emtron Training Course Part 55: Advanced Water/Meth Tuning breaks down how to integrate a custom water/meth injection system into the Emtron programming.

Emtron Training Course Part 56: Launch Control breaks down how to integrate the launch control into your calibration strategy. We walk through several examples of working with the launch control for a naturally aspirated, supercharged, and turbocharged engines.

Emtron Training Course Part 57: Rolling Anti-Lag walks you through how to properly configure the Emtron to achieve a rolling launch control and build boost on a turbocharged application to get a sling shot effect during a roll race.

Emtron Training Course Part 58: Gear Cut breaks down how to integrate a clutch switch, gear position switches, or a strain gage / load cell to achieve clutchless shifting on a dog box or sequential transmission.

Emtron Training Course Part 59: Over Run Boost (Rally Anti-Lag) walks you through how to integrate the over run boost building feature for a turbocharged engine to keep up on boost when lifting off throttle through corners.

Emtron Training Course Part 60: Traction Control (Slip Based) walks you through how to integrate a wheel speed slip based traction control. We explore good starting values for both ignition retard and spark cut to achieve smooth power management.

Emtron Training Course Part 61: Basic Nitrous Control walks you through how to properly calibrate on/off nitrous control within the EmTune software. We explore how to use the supplied nitrous excel calculator to properly populate nitrous control parameters to get accurate fueling.

Emtron Training Course Part 62: Progressive Nitrous Control walks you through how to integrate a solid state relay to the nitrous control routine to achieve progressive nitrous. This gives the most flexibility for power management and nitrous delivery when tuning with nitrous.

Emtron Training Course Part 63: Variable Cam Control breaks down how variable cam control works, how to properly configure it, and how to dial in the variable cam control tables.

Emtron Training Course Part 64: Drive-By-Wire Set-Up walks you through how to configure and set-up DBW analog inputs, servo outputs, and feed forward / PID based tuning.

Emtron Training Course Part 65: DBW Cranking & Idle Control breaks down how to get proper cranking airflow and idle control using a DBW application.

Emtron Training Course Part 66: DBW Idle Control (Throttle Mass Flow) breaks down how to use DBW idle control specific to the throttle mass flow strategy. This unique but extremely effective way of controlling the idle bases the throttle plate / idle control around desired airflow.

Emtron Training Course Part 67: DBW Tuning & Operation walks you through how to tune part throttle / cruise and full throttle mapping using DBW. We explore various methods of incorporating different throttle response curves and power limitation methods using DBW control.

Emtron Training Course Part 68: DBW Throttle Blip walks you through how to implement a throttle blip feature to aid in clutchless downshifting or rev matching using DBW control.

Emtron SFWD Acura Integra Live Training Part 1: Input/Ouput Base File Set-Up walks you through how to configure and test inputs/outputs with an Emtron SL8 standalone ecu.

Emtron SFWD Acura Integra Live Training Part 2: 2-D / 3-D Table Set-Up walks you through configuring fuel, spark, boost control tables, and much more.

Emtron SFWD Acura Integra Live Training Part 3: Start-Up / Idle Control Tuning walks you through the first start-up, checking timing with a timing light, and fuel/spark tuning at idle conditions.