ECUMaster Training Course Part 1: Software Install & Overview walks you through doing the software download / installation process to install the ECU Master Black software to begin our training course.

ECUMaster Training Course Part 2: Creating Custom Page Layouts walks you through how to create a custom page layout within the ECU Masters Black software. In addition, we explore the pre-defined page layouts supplied with the training course.

ECUMaster Training Course Part 3: EMU Black Software Overview walks you through all the details, features, and functions of the ECU Masters Black specific software.

ECUMaster Training Course Part 4: Working With Calibration Files shows you how to properly save & edit calibration files within the ECU Masters Black specific software. In addition, we learn how to upload a calibration file to the EMU Black.

ECUMaster Training Course Part 5: Working with Datalogging walks you through all the details you'll need to know to start data logging with the ECU Master Black software.

ECUMaster Training Course Part 6: VE Fuel Strategy goes over how the core tables and calculations work within the VE fuel strategy.

ECUMaster Training Course Part 7: Main Configuration & Set-Up walks you through getting the most vital details programmed to allow your engine to start-up and run.

ECUMaster Training Course Part 8: Cam/Crank Trigger Set-Up walks you through how to set-up the cam & crank sensor parameters for your engine using the EMU Black software. We explore using the built-in oscilloscope function to determine if the cam/crank patterns and details are programmed correct...

ECUMaster Training Course Part 9: Basic EMU Black Inputs shows you how to properly configure and program the most basic inputs to allow the engine to run. This includes MAP, Baro, TPS, and O2 related sensor configuration.

ECUMaster Training Course Part 10: Pressure & Temp Inputs walks you through how to configure main temperature inputs such as IAT and ECT sensors as well as additional sensors like oil pressure, fuel pressure, and oil temperature.

ECUMaster Training Course Part 11: Configuring Outputs goes through the set-up and configuration process to allow basic outputs like fuel pump control and radiator fan control to work. We explore using the user defined custom outputs in order to set-up several examples like a secondary fuel pump...

ECUMaster Training Course Part 12: Main VE Fuel Table Tuning gives you an in-depth looking at properly calibrating the main VE fuel table. We explore what the table represents, how to make editing changes, and what the table should represent once calibrated properly.

ECUMaster Training Course Part 13: Fuel Correction Tables walks you through the fuel correction tables such as intake air temperature, barometric pressure, differential fuel pressure, and fuel temperature. We also explore how the charge temp table bias between the intake air temp and engine cool...

ECUMaster Training Course Part 14: Cranking, After-start, and Warm-Up Fuel goes through the fuel delivery process from engine cranking to post-start engine operation.

ECUMaster Training Course Part 15: EGO Fuel Correction covers the closed-loop fuel control operation in the EMU Black software. We explore using the EGO fuel correction to calibrate the VE fuel table.

ECUMaster Training Course Part 16: Fuel Injection Angle Table covers timing the fuel injection firing event to either a SOI (start of injection) or EOI (end of injection) reference. We learn how to properly tune the fuel injection timing table in a EOI reference.

ECUMaster Training Course Part 17: Acceleration Enrichment walks you through how to properly dial in fuel delivery based on the throttle rate of change. In addition, we explore what to data log to analyze and tune acceleration enrichment properly.

ECUMaster Training Course Part 18: Alpha-N Tuning Strategy walks you through using throttle based fuel / ignition timing tuning. We also learn how to implement Alpha-N tuning with forced induction applications.

ECUMaster Training Course Part 19: Spark Timing & Modifiers walks you through the main spark timing table and modifier tables such as IAT and CLT.

ECUMaster Training Course Part 20: Knock Control walks you through properly configuring knock control to save the engine in case of knock. We learn how to program the knock frequency based on the engine's bore size and configuring the integrator, gain, and threshold tables.

ECUMaster Training Course Part 21: Idle Control walks you through how to properly tune the idle control using a manual idle, PWM, or Stepper style motors. We explore both open and closed-loop style idle control techniques.

ECUMaster Training Course Part 22: Engine Protection walks you through implementing various engine protection features such as oil pressure, lean protection, over heating protection, and many more.