AEM Series 1 Introduction

Follow along as lead instructor, Jeff Evans, walks you through how to download and install the AEM Pro and AEM Log software to begin the training course.

Follow along as lead instructor, Jeff Evans, walks you through the basic features and functions of the AEM Pro software to begin the training course.

Follow along as lead instructor, Jeff Evans, walks you through setting up the AEM Pro page layouts to save time while tuning your AEM Series 1.

Follow along as lead instructor, Jeff Evans, walks you through how to program your injector dead time / offset as well as configuring the basic sensor inputs.

Follow along as lead instructor, Jeff Evans, walks you through how to program your outputs such as a radiator fan, secondary fuel pump, and many other functions.

Follow along as lead instructor, Jeff Evans, walks you through working with the main fuel table and how to properly rescale the microbit/sec to gain precise fuel delivery.

Follow along as lead instructor, Jeff Evans, walks you through how the cranking fuel, post-start fuel trim, and warm up enrichment trims work and how to properly program them.

Follow along as lead instructor, Jeff Evans, walks you through working with the o2 feedback control to dial in your main fuel table, and provide a long term correction after you have completed tuning.

Follow along as lead instructor, Jeff Evans, walks you through working with the acceleration fuel enrichment and deceleration fuel cut off features within the AEM Pro software.

Follow along as lead instructor, Jeff Evans, walks you through working with the main spark timing table and modifier tables.

Follow along as lead instructor, Jeff Evans, walks you through working with the boost compensation fuel trim modifier table to provide a linear increase in fuel delivery based on manifold pressure changes.

Follow along as lead instructor, Jeff Evans, walks you through working how to tune the idle control in both the basic and advanced settings.

Follow along as lead instructor, Jeff Evans, walks you through working with the knock control feature in the AEM Pro software.

Follow along as lead instructor, Jeff Evans, walks you through working how to set-up your main rev limiter and 2 step rev limiter features within the AEM series 1 software. We also take a look at working with the drag race anti-lag feature to build boost off the line for a turbocharged engine.

Follow along as lead instructor, Jeff Evans, walks you through working how to program your coil dwell settings, and work with the injector phasing table to optimize the injector timing.

Follow along as lead instructor, Jeff Evans, walks you through working how the nitrous control programming works, and strategies to implement when tuning with nitrous.

Follow along as lead instructor, Jeff Evans, walks you through working how to work with the boost control feature in the AEM Pro software. We take a look at both open and closed loop control strategies, as well as the workflow to dial in the closed loop boost tables.

Follow along as lead instructor, Jeff Evans, walks you through how to program VTEC equipped Honda engines. We cover the basic output control to utilizing separate fuel and spark timing tables for high cam operation.

Follow along as lead instructor, Jeff Evans, walks you through different tuning strategies working with water/meth injection within the AEM Pro software.

Follow along as lead instructor, Jeff Evans, walks you through various misc programming features within the AEM Pro software such as VSS calibration, gear ratios, Tacho output, TPS based fuel tables, and more.

Follow along as lead instructor, Jeff Evans, as he walks you through how to capture data logs by PC/laptop or the on-board logging feature. We also take a look what on-board logging channels are useful for logging purposes.

Follow along as lead instructor, Jeff Evans, as he walks you through an introduction to using the AEM Log software to review data logs captured in AEM Pro.

Follow along as lead instructor, Jeff Evans, as he walks you through using the overlay option in the AEM Log software to compare two different log files.