Introduction to AEM Infinity training course.

AEM Infinity training course part 1 walks you through downloading and installing the software onto your laptop, as well as downloading the firmware file specific for your Infinity.

AEM Infinity training course part 2 walks you through installing the firmware image onto the Infinity, as well as working with the session ID's to begin the tuning process.

AEM Infinity training course part 3 walks you through basic software navigation to get comfortable with the layout of the Infinity Tuner software.

AEM Infinity training course part 4 walks you through both laptop & on-board data logging using the AEM Infinity Tuner software. We also take an in-depth look at how to format a new USB storage drive using the on-board logging feature.

AEM Infinity training course part 5 walks you through editing existing layout/templates for tuning, creating a new page within the layout, and creating a fresh layout.

AEM Infinity training course part 6 walks you through setting up our basic configuration and sensor data. This includes things such as injector information, basic sensors, engine details and other pertinent information that we need to establish before tuning begins.

AEM Infinity training course part 7 walks you through setting up additional inputs to the Infinity such as additional pressure & temp sensors, switches, speed sensors and more.

AEM Infinity training course part 8 walks you through configuring outputs to control items such as fuel pump, radiator fan, a/c clutch, VTEC & tachometer.

AEM Infinity training course part 9 walks you through how the Infinity system works with injector characterization data differently for a return and return-less fuel system. As an added bonus we take a look at adding a fuel pressure sensor to our fuel system, and wiring the sensor into the Infin...

AEM Infinity training course part 10 walks you through the cranking fuel trim tables found within the AEM Infinity Tuner software and how to properly tune them.

AEM Infinity training course part 11 walks you through the post-start and warm-up enrichment tables found within the AEM Infinity Tuner software and how to properly tune them.

AEM Infinity training course part 12 walks you through how to set-up and work with the idle control programming found in the AEM Infinity software.

AEM Infinity training course part 13 walks you through working with our main VE fuel table, closed loop fuel tuning techniques, wiring in an external wideband controller for closed loop control, and utilizing the fuel trim modifier tables.

AEM Infinity training course part 14 walks you through working with our main ignition timing table and spark modifier tables.

AEM Infinity training course part 15 walks you through the acceleration enrichment and deceleration fuel cut found in the Infinity Tuner software.

AEM Infinity training course part 16 walks you through working with the protection fail-safe features found in the Infinity software using our engine simulator to see cause/effect during the programming of the tables.

AEM Infinity training course part 17 walks you through setting up and tuning with the flex fuel feature in Infinity Tuner software.

AEM Infinity training course part 18 walks you through setting up and configuring the boost control feature found in Infinity Tuner software. We also take a look at closed loop PID control and how to successfully implement it during tuning.

AEM Infinity training course part 19 walks you through setting up and configuring traction control. Using our engine simulator we take a very detailed look at how to do a rolling wheel speed calibration, and how the traction control system works based on the many tables that need to be properly...

AEM Infinity training course part 20 walks you through setting up and configuring the main rev limiter, 2 step rev limiter and 3 step rev limiters.